Browsing by Author "Faria, Paulina"
Now showing 1 - 6 of 6
Results Per Page
Sort Options
- Agro-industrial wastes as building insulation materials : A review and challenges for Euro-Mediterranean countriesPublication . Cintura, Eleonora; Nunes, Lina; Esteves, Bruno M.; Faria, PaulinaThis study investigates the possibility of using agro-industrial wastes for building products, mainly focusing on their insulation properties. A classification of bio-wastes is provided, namely of the lignocellulosic ones and their features and properties are described. Information about three main topics is collected: world production and consumption of some crops already used as building materials, their chemical composition and their most studied properties. Since the considered materials are lignocellulosic and they have many common features, a comparison is made. The aim is to have comparable information to support future research related to the production of eco-efficient indoor insulation boards. The result of this research is the choice of four different agro-industrial wastes produced in the Euro-Mediterranean Countries. This area was chosen as buildings typically have little or no insulation due to the regional mild climate; however, particularly with climate change, indoor hygrothermal comfort is poor. The collection of information allows some conclusions to be reached about the different bio-wastes already studied and identify gaps in the literature.
- Assessment of the Density Loss in Anobiid Infested Pine Using X-ray Micro-Computed TomographyPublication . Parracha, João Luís; Pereira, Manuel; Maurício, António; Faria, Paulina; Lima, Daniel F.; Tenório, Marina; Nunes, LinaThe present study aims at evaluating the impact of anobiid damage on pine timber elements. Anobiid attack produces a diffuse damage of the elements with a set of tunnels in random directions and sizes, thus confusing quantification. Therefore, a method was developed based on X-ray micro-computed tomography (μ-XCT) to obtain, for naturally infested timber samples, an empirical correlation between lost material percentage (consumed by beetles) and timber apparent density (original, before degradation—OTD and residual, after degradation—RTD). The quantified density loss can then be used in further assessment of the structure. The results of the tests performed showed high correlation between original apparent density and lost material percentage (r² = 0.60) and between residual apparent density and lost material percentage (r² = 0.83), which confirms μ-XCT as a valuable tool to the required quantification. The loss of density results can be further applied on the definition of an assessment method for the evaluation of the residual strength of anobiids infested timber, thus contributing to reducing unnecessary replacement. The optimized procedure of the μ-XCT study for infested Maritime pine (Pinus pinaster) is presented and discussed in this article.
- Cement-Bonded Particleboards with Banana Pseudostem Waste : Physical Performance and Bio-SusceptibilityPublication . Nunes, Lina; Cintura, Eleonora; Parracha, João Luís; Fernandes, Bruno; Silva, Vitor; Faria, PaulinaThis article evaluates the relevant properties of cement-bonded particleboards (CBPB) made with a portion of maritime pine (Pinus pinaster) particles replaced with an agricultural waste, banana pseudostem (Musa sp.). The industrial production of CBPB was simulated in the laboratory based on a reference composition defined by a manufacturing company. Test specimens were produced assuming 0%, 25%, 50% and 75% partial replacement of wood particles with banana pseudostem fibres. Some physical properties (bulk density, thermal conductivity, and dimensional stability) and the mould susceptibility of the different variables were assessed. Results show that the thermal conductivity of the boards increased with the banana fibre proportion and ranged between 0.233 W/(m.K) and 0.279 W/(m.K). The bulk density values generally increased with the banana fibre proportion and ranged between 1754–1995 kg/m3, being the highest value obtained for B50 (equal weight proportion of wood particles and banana fibres). Specimens with a higher percentage of banana fibres have reduced thickness resulting from swelling, ranging between 0.38% and 0.11% (for 0% and 75% of banana fibres, respectively). CBPBs with unsanded surfaces seem to be unsusceptible to mould development, whereas those with sanded surfaces, simulating wearing, show some bio-susceptibility. Mould development increases with the proportion of banana fibre. The results highlight the need for regular maintenance of the particleboards, thus avoiding surface wear over time and resulting in the exposure of the wood particles and/or banana fibres to the outside environment.
- Characterization of an Arundo donax-based composite: A solution to improve indoor comfortPublication . Cintura, Eleonora; Faria, Paulina; Molari, Luisa; Barbaresi, Luca; D'ORAZIO, DARIO; Nunes, LinaABSTRACT: Arundo donax (giant reed or giant cane) is a widely available, perennial, invasive, non-food crop, present worldwide and employed for several uses, including building practices. Considering the increasing demand for sustainable building materials, A. donax can be an efficient solution. This study investigated its properties as a bio-aggregate mixed with a sodium silicate solution as an adhesive. A horizontal analysis that provided a general characterization of the composite was carried out. The results showed that the A. donax-based composite had an apparent density of 517 kg/m³, thermal conductivity of 0.128 W/(m.K), and high hygroscopicity, with a moisture buffering value of 4.33 g/(m² %RH), property that could be both an advantage for indoor comfort and a drawback. The uncommon sound absorption behaviour can be comparable to granular materials, with the highest sound absorption coefficient values, α, between 600 Hz and 700 Hz. Due to the range and the shape of the acoustic absorption property, this material may be helpful in acoustic treatments for speech noise. The mechanical tests defined flexural and compressive strength, respectively, 0.35 N/mm² and 0.9 N/mm², ensuring applicability. Above all, these tests opened new possible solutions for A. donax-based composite production either alone or in combination with other agro-industrial wastes and justified further tests, such as fire resistance and bio-susceptibility.
- Effects of hygrothermal, UV and SO₂ accelerated ageing on the durability of ETICS in urban environmentsPublication . Parracha, João Luís; Borsoi, Giovanni; Veiga, Rosário; Flores-Colen, Inês; Nunes, Lina; Garcia, Ana R.; Ilharco, Laura M.; Dionísio, Amélia; Faria, PaulinaExternal Thermal Insulation Composite Systems (ETICS) have been extensively used for either new constructions or building facades retrofitting in the last decades. These systems can provide improved thermal performance to the building envelope. However, their long-term durability remains a pervasive concern, with some systems presenting relevant anomalies after few years from their application. The durability assessment of ETICS is defined by the EAD 040083-00-0404 guideline, which stated an accelerated ageing procedure based on the hygrothermal and freeze-thaw behaviour. Nevertheless, further important environmental urban conditions, such as UV radiation and atmospheric pollutants, as well as bio-susceptibility, are not envisaged in the guideline. This paper presents the results of an experimental campaign with the aim of evaluating the durability of the rendering system of several commercially available ETICS exposed to an innovative accelerated ageing procedure, which consists of hygrothermal cycles, UV radiation and air pollutants (SO₂) exposure. Physical and chemical-morphological tests were carried out prior and after each ageing cycle in order to evaluate the durability of ETICS. Biological susceptibility to moulds was also assessed. The experimental results showed that both surface hardness and surface gloss decreased after the combined effect of the hygrothermal, UV, and SO₂ ageing cycles, whereas an increase of surface roughness was observed. Substantial colour change for all systems after the ageing procedure was observed, confirming aesthetic alteration. Traces of biological growth were detected on the systems after ageing and the contact angle decreased after the hygrothermal cycles, indicating a lower surface hydrophobicity of the systems.
- Performance parameters of ETICS : Correlating water resistance, bio-susceptibility and surface propertiesPublication . Parracha, João Luís; Borsoi, Giovanni; Flores-Colen, Inês; Veiga, Rosário; Nunes, Lina; Dionísio, Amélia; Gomes, M. Glória; Faria, PaulinaThe use of External Thermal Insulation Composite Systems (ETICS) significantly increased in the last decades due to their enhanced thermal properties, low installation cost and ease of application, not only in new constructions but also for thermal retrofitting of building facades. These multilayer rendering systems are constantly exposed to weathering agents and anthropic factors which can lead to physical-mechanical and aesthetical anomalies and thus affect their durability. However, possible synergetic effects among these agents are often neglected by international technical documents on the evaluation of the effectiveness and durability of ETICS. With the aim of filling this gap, moisture transport properties (capillary water absorption, water vapor permeability, water absorption under low pressure, and drying kinetics), thermal conductivity, mould susceptibility and surface properties (color, gloss, and roughness) of twelve commercially available ETICS were assessed and discussed. Possible links between these factors were analyzed and ETICS performance parameters were defined. Results demonstrate that a deeper knowledge of the correlation among ETICS properties can effectively contribute to the evaluation of the efficiency and long-term durability of these systems.